Kobelco SK350 6HK1 Rebuild Kit for SK350LC-11, SK400DLC-11

Description

Kobelco SK350 6HK1 Rebuild Kit: Rebuild the Isuzu Engine in Your SK350 or SK400

A down SK350 costs far more each day than the parts to fix it. This Kobelco SK350 6HK1 rebuild kit supplies pistons, cylinder liners, bearings, valves and a complete gasket set for the six-cylinder, electronic fuel injection Isuzu 6HK1 diesel in Kobelco SK350LC-11, SK350DLC-11 and SK400DLC-11 excavators, and in the John Deere models listed below. Choose your bearing size and order today.

Kit Contents

The kit arrives as one set with these 12 parts:

• Complete gasket set for the rebuild
• Cylinder liners (one set)
• Pistons (one set)
• Piston pins (one set)
• Snap rings (one set)
• Piston rings (one set)
• Rod bushings (one set)
• Main and connecting rod bearings, matched set
• Thrust bearings (one set)
• Intake and exhaust valves (one set)
• Intake and exhaust valve seats (one set)
• Valve guides (one set)

This kit does not list semi-finished liners, so ask us whether the liners need machining. The connecting rod bearings come as a matched set. The block, crankshaft and cylinder head are not included.

Key Features

• Built for the EFI 6HK1. The kit is specified for the electronic fuel injection Isuzu 6HK1 and carries the reference number 8982445220, so you can check it against your old parts.
• Matched rod bearings. The connecting rod bearings are supplied as a matched set with the main bearings, thrust bearings and rod bushings.
• Complete wear set. Pistons, rings, pins, snap rings and liners pair with valves, valve guides and valve seats, so the head can be reconditioned in the same job.
• Simple sizing. One selection at checkout: Standard, 0.25 mm (.010) oversize or 0.50 mm (.020) oversize for the main and rod bearings.
• Fixes what you can hear and see. Smoke, rising oil use, hard starting and a loss of power under load usually trace back to worn rings, liners and bearings. Renewing them together addresses the cause.

Compatibility

This Kobelco SK350 6HK1 rebuild kit fits the Isuzu 6HK1 engine. The Kobelco excavators listed are the SK350LC-11, SK350DLC-11 and SK400DLC-11. The John Deere models listed are the 190GW, 245 P, 245G, 345 P and 345G LC.

Check the engine code on your nameplate before ordering, and confirm that your engine is the electronic fuel injection type. Send us a nameplate photo if you want help.

Driving an Isuzu truck with a 6HK1 instead? See our Isuzu 6HK1 rebuild kit. Older Isuzu excavator engines are covered by our Isuzu 4HK1 rebuild kit, and every kit is in the Isuzu rebuild kits category.

Why Choose This Kobelco SK350 6HK1 Rebuild Kit

Owners of large excavators choose this Kobelco SK350 6HK1 rebuild kit for practical reasons:

• Less downtime. The wear parts arrive in one order, so a machine that earns every day is not waiting on parts.
• Far cheaper than a new engine. Renewing the wear parts keeps a high-value excavator working.
• Parts that match each other. A matched set of liners, pistons, bearings and valves avoids mismatched sizes from separate suppliers.
• Help before you buy. Send your engine serial number and we will help you confirm fitment. Isuzu engine information is at Isuzu Diesel Engines.

FAQs

Which machines use the Kobelco SK350 6HK1 rebuild kit?

The listed machines are the Kobelco SK350LC-11, SK350DLC-11 and SK400DLC-11, and the John Deere 190GW, 245 P, 245G, 345 P and 345G LC, all with the Isuzu 6HK1 engine.

What is the number 8982445220?

It is the reference number for this kit. Use it, together with 8-9824-4522-0 and 8-98244522-0, to cross-check against your old parts.

What bearing sizes are available?

Standard, 0.25 mm (.010) oversize and 0.50 mm (.020) oversize. Measure your crankshaft journals before choosing.

What is not included?

The engine block, crankshaft and cylinder head are not included in the kit.

Get the excavator back on site. Select your bearing size and add the Kobelco SK350 6HK1 rebuild kit to your cart. Not sure about fitment? Send us your engine serial number before you order.