Isuzu 3AD1 Rebuild Kit for Iseki TS3110 and TS3910

Description

Isuzu 3AD1 Rebuild Kit: Rebuild the Engine in Your Iseki TS3110 or TS3910 Tractor

A tractor that will not run in the field costs you the day. This Isuzu 3AD1 rebuild kit gives you pistons, cylinder liners, bearings, valves and a complete gasket set for the three-cylinder Isuzu 3AD1 diesel in Iseki TS3110 and TS3910 tractors. Choose your bearing sizes below and order today.

Kit Contents

Everything for the core rebuild comes in one kit:

• Complete gasket set for the rebuild
• Cylinder liners, semi-finished (one set)
• Pistons, standard size (one set)
• Piston pins (one set)
• Snap rings (one set)
• Rod bushings (one set)
• Piston ring sets, standard size
• Main bearings (one set)
• Connecting rod bearings (one set)
• Thrust washers (one set)
• Intake and exhaust valves (one set)
• Valve guides (one set)
• Intake and exhaust valve seats (one set)

The cylinder liners are semi-finished and need final machining. Pistons, rings, pins and snap rings are standard size. The block, crankshaft and cylinder head are not included.

Key Features

• Made for the 3AD1. The kit is listed for the Isuzu 3AD1, so the pistons, rings and liners suit the engine in your Iseki tractor.
• Bottom end renewed as a set. Pistons, rings, pins, snap rings and rod bushings go in with fresh main bearings, rod bearings and thrust washers.
• Cylinder head parts included. Valves, valve guides and valve seats let you recondition the head in the same job.
• Bearing sizes to choose from. Main and connecting rod bearings come in Standard, +0.25 mm and +0.5 mm.
• Brings back the power. Low compression, smoke and heavy oil use on a working tractor usually come from worn rings, liners and bearings. Renewing them together restores power under load.

Compatibility

This Isuzu 3AD1 rebuild kit fits the Isuzu 3AD1 engine in the Iseki TS3110 and TS3910 tractors. Confirm the engine code on your nameplate before ordering.

Own an Iseki TA357 or TA345 instead? Those tractors use the 4JE1 engine, so see our Isuzu 4JE1 rebuild kit. Every kit is in the Isuzu rebuild kits category.

Measure your crankshaft journals before choosing a bearing size. If you are unsure, send us a photo of the engine nameplate and we will help you confirm the kit.

Why Choose This Isuzu 3AD1 Rebuild Kit

Tractor owners choose this Isuzu 3AD1 rebuild kit because it makes the repair simple:

• One order. The wear parts arrive together, so the rebuild is not held up.
• Cheaper than replacing the tractor. A rebuild keeps equipment you already own working.
• Right sizes at checkout. You pick main and rod bearing sizes to match your crankshaft.
• Parts that match each other. Buying pistons, liners, bearings and valves as one kit avoids mismatched sizes from separate suppliers.
• Help before you buy. Send your engine serial number and we will help you confirm fitment. Isuzu engine information is at Isuzu Diesel Engines.

FAQs

Which tractors use the Isuzu 3AD1 rebuild kit?

The listed tractors are the Iseki TS3110 and TS3910, with the Isuzu 3AD1 engine.

How do I choose my bearing size?

Measure the crankshaft journals. A crank that has not been ground normally takes Standard bearings, and a ground crank needs +0.25 mm or +0.5 mm.

Does the kit include the cylinder head?

No. The kit includes valves, guides and seats for the head, but not the head itself, the block or the crankshaft.

Are the liners ready to fit?

No. They are semi-finished and need machining to suit your block.

Is this kit for a tractor or a construction machine?

It is listed for Iseki TS3110 and TS3910 tractors. The Isuzu 3AD1 is a three-cylinder diesel, so confirm your engine code on the nameplate before you order.

Get the tractor working again. Select your bearing sizes and add the Isuzu 3AD1 rebuild kit to your cart. Not sure about fitment? Send us your engine serial number before you order.