Isuzu 6BD1T Rebuild Kit for Turbo Hitachi EX200 Excavators

Description

Isuzu 6BD1T Rebuild Kit: Rebuild the Turbocharged Engine in Your Hitachi EX200

A turbo excavator that has lost power or started burning oil is costing you hours every week. This Isuzu 6BD1T rebuild kit supplies pistons, cylinder liners, bearings, valves and a full gasket set for the turbocharged six-cylinder Isuzu 6BD1T diesel in Hitachi EX200-1, EX200-2 and EX200-3 excavators. Choose your options below and order today.

Kit Contents

The kit is supplied as one complete set:

• Complete gasket set for the rebuild
• Cylinder liners, semi-finished (one set)
• Pistons, standard size (one set)
• Piston pins (one set)
• Snap rings (one set)
• Rod bushings (one set)
• Piston ring sets, standard size
• Main bearings (one set)
• Connecting rod bearings (one set)
• Thrust washers (one set)
• Intake and exhaust valves (one set)
• Valve guides (one set)
• Intake and exhaust valve seats (one set)

Liners are semi-finished and need machining. Pistons and rings are standard size. The turbocharger, injectors, block, crankshaft and cylinder head are not included, so inspect them while the engine is apart.

Key Features

• Made for the turbo engine. The kit lists the Isuzu 6BD1T and also covers the naturally aspirated 6BD1.
• Piston height choice. Select 98 mm or 104 mm to match your pistons.
• Renews the parts that wear first. New liners, pistons and rings restore compression, and fresh bearings restore the oil pressure a turbocharger depends on.
• Head parts included. Valves, valve guides and valve seats are in the kit, so the head can be reconditioned in the same job.
• Bearing sizes. Main and connecting rod bearings come in Standard, +0.25 mm and +0.5 mm.

Compatibility

This Isuzu 6BD1T rebuild kit fits the Isuzu 6BD1T and 6BD1 engines in the Hitachi EX200-1, EX200-2 and EX200-3 excavators.

Naturally aspirated engine? The same kit is on our Isuzu 6BD1 rebuild kit page. Browse every Isuzu rebuild kit in the catalog.

While the engine is apart, inspect the turbocharger shaft play and clean or replace the oil feed line. Compare your old piston with the 98 mm and 104 mm options, and send us a photo if you are unsure.

Why Choose This Isuzu 6BD1T Rebuild Kit

Buyers pick this Isuzu 6BD1T rebuild kit for the following reasons:

• Complete wear-part set. Pistons, liners, bearings, valves and gaskets arrive together.
• Healthy oil pressure. Fresh bearings matter on a turbo engine that relies on a steady oil supply.
• Parts that match each other. Buying pistons, liners, bearings and valves as one kit avoids mismatched sizes from separate suppliers.
• Economical. A rebuild keeps a machine you already own working without paying for a new engine.
• Support before you buy. Send your engine serial number and we will help you confirm fitment. Isuzu engine information is at Isuzu Diesel Engines.

FAQs

Which machines use the Isuzu 6BD1T rebuild kit?

The listed machines are the Hitachi EX200-1, EX200-2 and EX200-3 excavators, with the Isuzu 6BD1T or 6BD1 engine.

Is the turbocharger included?

No. The turbocharger, injectors, block, crankshaft and cylinder head are not in the kit.

How do I choose the piston height?

Piston height is 98 mm or 104 mm. Compare your old piston, or send us a photo and your engine serial number and we will help.

What bearing sizes are available?

Standard, +0.25 mm and +0.5 mm for both main and connecting rod bearings. Measure your crankshaft journals first.

Does the kit also fit the naturally aspirated 6BD1?

Yes. The kit is listed for both the Isuzu 6BD1T and 6BD1 engines, so it suits either version in the EX200-1, EX200-2 and EX200-3.

Are the liners ready to install?

No. The liners are semi-finished and need final machining to suit your block.

Get your turbo EX200 back to full power. Select your bearing sizes and piston height, then add the Isuzu 6BD1T rebuild kit to your cart. Unsure? Send us your engine serial number first.